Gehl Compact Construction Equipment

V270 GEN:2
Vertical-Lift Skid Loader

  • Height to Hinge Pin - Fully Raised: 3310 mm
  • Rated Operating Capacity: 1225 kg
  • Power: Net 52.7 kW
Find a Dealer Request More Info
V270 GEN:2 Skid Loader

Performance

The V270 GEN:2 Skid Loader is a product of superior innovation and well thought-out product development.

  • Emissions certified Tier IV engines combine power and efficiency.
  • Self leveling lift action for better control of lifting loads.
  • The chassis aids in superior weight distribution, which further enhances stability.
  • Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class.
  • A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights.
  • Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption.

Operator's Cabin

The spacious operator’s compartment on the V270 GEN:2 Skid Loader is every operator’s dream.

  • Level II FOPS is standard equipment.
  • Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide cleaner and quieter operating environment.
  • Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas.
  • Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.
  • Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.
Gehl V270 Skid Steer Operator's Cabin

Controls

Gehl V270 Vertical Lift Skid Loader Controls

The Gehl V270 GEN:2 Skid Loader is ergonomically designed to reduce operator fatigue and increase productivity.

  • T-Bar and dual-hand controls now available.
  • Optional electronic attachment control - 14-pin connector for easy operation of all attachments.
  • Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.
  • New upper-left and upper-right instrument panels provide easy readout and switch access.
  • Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.
  • Infinitely adjustable proportional auxiliary hydraulics.
  • Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

Emissions certified Tier IV engines combine power and efficiency on the V270 GEN:2 model.

  • Engine consumes less fuel, making a positive impact on the bottom line.
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine has conventional water/ethylene glycol liquid-cooled design.
  • Engine warranty, parts and service are handled through normal dealership servicing in conjunction with Gehl parts and service support.
Make Yanmar
Model 4TNV98CT-NMS Tier IV
Net Power (kW) @ rpm 70.7 hp (52.7) @ 2500
Maximum Torque (Nm) 217 ft.-lbs. (294) @ 1625
Travel Speed - Max with 2-Speed Option (km/hr) 11.9 mph (19.2)
Gehl Vertical Lift Skid Loader Engine V270

Hydraulics

When maximum hydraulic power is needed to run demanding attachments, the V270 GEN:2 Skid Loader is equipped with the tools to get the job done right.

  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Standard auxiliary detent allows the operator to set attachment for continuous operation.
  • Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material at faster transport speeds.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Pilot-controlled hydrostatic transmission with direct engine coupling provides high operating efficiency.
Auxiliary Hydraulics - Standard (L/min) 23.5 gpm (89)
High-Flow Hydraulics - Optional (L/min) 35 gpm (132)
System Relief Pressure (bar) 3,200 psi (220.6)
Reservoir Capacity (L) 10.5 gal. (40)

Lift Arm

Gehl V270 Vertical Lift Arm

The V270 GEN:2 Skid Loader does not use the ordinary vertical-lift design. This loader’s lift arm is designed with the operator in mind.

  • Low-profile lift arm design provides outstanding forward and side visibility.
  • Self-leveling lift action provides better control of lifting loads.
  • Heavy-duty timing link design, upper-rear channel support and large diameter pivot pins provide extra strength and rigidity to the lift arm, and exceptional rear visibility.
  • Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 130" (3310)
Dump Reach at Full Height (mm) 32" (813)

Serviceability

As with any Gehl loader, serviceability on the V270 GEN:2 Skid Loader is a snap.

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Featured cab safety restraint bar for lifting ROPS/FOPS.
  • Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
  • Remote engine oil filter is on left side; easy access to hydraulic oil filter on right side.
  • Entire ROPS/FOPS assembly tilts rearward with a hydraulic lift for easy internal service access.
  • Drive chains and axle bearings are sealed systems that require no maintenance.
  • Coded wiring takes the guesswork out of electrical system identification.
Gehl V270 Skid Loader Service Access
Show Standard   Show Metric

Specifications (standard)

Dimensions
A  Overall Operating Height - Fully Raised 167.4"
B  Height to Hinge Pin - Fully Raised 130.3"
C  Overall Height to Top of ROPS 81"
D  Ground Clearance to Chassis 8.0"
E  Overall Length with Bucket 148"
F  Overall Length without Bucket 116.5"
G  Wheelbase 49.5"
H  Dump Reach - Fully Raised 32"
I  Rollback at Ground 29°
J  Dump Angle 42°
K  Overall Width  69.5"
L  Bucket Width 70"
M  Clearance Circle - Rear 65.5"
N  Clearance Circle - Front without Bucket 56"
O  Clearance Circle - Front with Bucket 90"
P  Seat to Ground Height 40"
Q  Rollback at Specified Height 94°
R  Dump Height 100"
S  Departure Angle 25°
Standard Specification Tire Size 12.00 - 16.5 HD

Engine
Make Yanmar
Model 4TNV98CT-NMS Tier IV
Net Power @ rpm 70.7 hp @ 2500
Gross Power @ rpm 72 hp @ 2500
Displacement 202.6 cu.in.
Maximum Torque 217 ft.-lbs. @ 1625

Hydraulic System
Auxiliary Hydraulics - Standard 23.5 gpm
High-Flow Auxiliary Hydraulics - Option 35 gpm
System Relief Pressure  3,200 psi
Reservoir Capacity 10.5 gal.

Capacities/Weights
Rated Operating CapacityA 2,700 lbs.
Fuel Tank 24.5 gal. 
Travel Speed - Maximum 7.4 mph
Travel Speed with Two-Speed OptionB - Maximum 11.9 mph
Operating WeightC - Approximate 8,150 lbs.

A - Per SAE J818, SAE J732 and ISO 14397

B - Two-speed is optional on V270 GEN:2 and standard on V330 GEN:2

C - Weight of base unit with standard equipment, standard bucket and 175 lb. operator and full fuel tank

Gehl Vertical Lift V270 Specifications Diagram

Specifications (metric)

Dimensions
A  Overall Operating Height - Fully Raised 4252 mm
B  Height to Hinge Pin - Fully Raised 3310 mm
C  Overall Height to Top of ROPS 2057 mm
D  Ground Clearance to Chassis 203 mm
E  Overall Length with Bucket 3759 mm
F  Overall Length without Bucket 2959 mm
G  Wheelbase 1257 mm
H  Dump Reach - Fully Raised 813 mm
I  Rollback at Ground 29°
J  Dump Angle 42°
K  Overall Width  1765 mm
L  Bucket Width 1778 mm
M  Clearance Circle - Rear 1689 mm
N  Clearance Circle - Front without Bucket 1422 mm
O  Clearance Circle - Front with Bucket 2286 mm
P  Seat to Ground Height 1016 mm
Q  Rollback at Specified Height 94°
R  Dump Height 2540 mm
S  Departure Angle 25°
Standard Specification Tire Size 12.00 - 16.5 HD

Engine
Make Yanmar
Model 4TNV98CT-NMS Tier IV
Net Power @ rpm 52.7 kW @ 2500
Gross Power @ rpm 53.7 kW @ 2500
Displacement 3.3 L
Maximum Torque 294 Nm @ 1625

Hydraulic System
Auxiliary Hydraulics - Standard 89 L/min
High-Flow Auxiliary Hydraulics - Option 132 L/min
System Relief Pressure  220.6 bar
Reservoir Capacity 40 L

Capacities/Weights
Rated Operating CapacityA 1225 kg
Fuel Tank 72.7 L
Travel Speed - Maximum 12 km/hr
Travel Speed with Two-Speed OptionB - Maximum 19.2 km/hr
Operating WeightC - Approximate 3697 kg

A - Per SAE J818, SAE J732 and ISO 14397

B - Two-speed is optional on V270 GEN:2 and standard on V330 GEN:2

C - Weight of base unit with standard equipment, standard bucket and 79 kg operator and full fuel tank

Gehl Vertical Lift V270 Specifications Diagram

Manuals

Options

Control Patterns
Gehl T-Bar Controls Optional
Hand/Foot Controls Optional
Joystick Controls Optional
Dual-Hand Controls Optional

Engine
Engine Auto-Shutdown System Standard
Engine Pre Heater Standard
Turbo-charged Engine Standard

Hydraulics
Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional

Operator Station
Adjustable Arm Rests/Control Towers Standard
Air-Conditioning Optional
High Back Adjustable Seat Standard
Suspension Seat - Air Ride Optional
Suspension Seat - Mechanical Optional
Cab Enclosure Optional
Foot and Hand Throttles Standard
Full Instrumentation Standard
Heating Optional
Horn Standard
Integral Access Plate (Removable) Standard
Operator Restraint Bar Standard
ROPS/FOPS Level II Overhead Guard Standard
Sound Reduction Material Standard
Suspension Seat - Mechanical Standard
Work Lights - Front and Rear Standard

Performance
All-Tach® Attachment Mounting System Standard
Power-A-Tach® Attachment Mounting System Optional
Electronic Attachment Control - 14-Pin Connector Optional
Anti-Vandalism Protection Standard
Back-Up Alarm Optional
Brake Control (Auto/Manual)/td> Standard
Counterweight Optional
Hydraglide™ Ride Control Standard
Hydraloc™ Safety System Standard
Hydrostatic Drive - Servo Standard
Lift Arm Support Device Standard
Self-Leveling Lift Action Optional
Two-Speed Drive Optional


Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

© Copyright 2018. All rights reserved. A Manitou Group Brand.
Terms of use • Privacy Policy • Governance